Lower ash tank, vertical drilling ash tank, vertical ash storage tank
Release time: 2016/04 / 26Views of solid control equipment : 6219
Vertical ash storage tanks (lower ash tanks, vertical drilling ash tanks) are pneumatically conveyed, that is, with the help of fluidized devices, compressed air is used as the driving force to pass compressed air through the gasification bed to transfer the ash in the storage tank Gradually become fluidized. The fluidized ash enters the tank through the ash inlet pipe, and then controls the ash output by operating the disc valve through the ash outlet pipe. Remove blockage). The ash can be discharged from the storage tank by using the pressure difference between the inside and outside of the tank, and the weight of the ash can be controlled by the scale of the tank.
1.Heavy operation method of lower ash tank and vertical drilling ash tank:
① All valves should be closed.
② Connect the vertical tank discharge pipe to the interface of the heavy-duty mixing device with a rubber hose.
③ Start the air compressor to make it work at the rated speed. When the air pressure reaches the rated working pressure, open the balloon valve of the air compressor, and the airflow enters the vertical tank through the inlet pipe valve. Gasification device to make the powder into a fluid state.
④ When the powder is in a fluid state, open the discharge tray valve of the vertical tank and send the powder into the spray funnel.
⑤Sweep the ash and remove the remaining ash in the ash outlet pipe after the discharge is finished; open the ash sweep tube valve on the tank and clean the ash remaining in the pipeline with compressed air for next use .
2. Advantages of the lower ash tank:
① Fast ash down speed ② The amount of ash can be adjusted arbitrarily
3. Use of vertical ash storage tank:
The lower ash tank is placed on the well site for storing cement and barite powder for cementing.
4. Working principle of ash tank under vertical drilling:
Compressed air is used to fluidize the ash, and the material is conveyed through the flow channel.
5. The composition of the lower ash tank:
1. Ash inlet pipe, 2 exhaust pipe, 3 base, 4 gasification system, 5 grey outlet pipe, 6 pressure gauge, 7 safety valve, 8 traction lugs (see Figure 1)
6. Technical parameters of drilling ash tank:
|Ash tank diameter||100mm||100mm|
|Ash out tank diameter||125mm||125mm|
|Exhaust pipe diameter||50mm||50mm|
Research vertical ash storage tank has simple structure, reasonable design, convenient and fast installation and operation, accurate dosage and high work efficiency, improved drilling fluid quality, reduced amount of added materials, greatly reduced labor intensity of workers, and Conducive to on-site environmental protection operations.
Ai Yi Machinery specializes in designing and producing solid control equipment and mud non-landing equipment for many years. It has rich research and development experience, and can develop and produce equipment suitable for working conditions according to actual conditions. If you are interested, please contact us.